Repair system for damaged mill-applied PE coating.
PE MELT-STICK is a heat-sensitive, PE copolymer-based stick used for small superficial, damage (scratches) to PE-coatings where the damage does not extend to the bare metal. Maximum damaged area can be 25 mm by 25 mm or 6.25 cm².
Installation is done with a standard gas torch. After eliminating all sharp edges, cleaning and preheating, PE-MELT-STICK is heated above the damaged area until becoming glossy. No filler is required. The molten adhesive is spread onto the scratches, forming a tight bond with the substrate. After cool down, the hardening adhesive is smoothed flush with the PE line coating using a paint scraper.
Perp Melt Stick Coating Repair
Repair system for damaged mill-applied PE coating.
PE MELT-STICK is a heat-sensitive, PE copolymer-based stick used for small superficial, damage (scratches) to PE-coatings where the damage does not extend to the bare metal. Maximum damaged area can be 25 mm by 25 mm or 6.25 cm².
- Versatile and adaptable repair system.
- Resistant to high shear forces.
- Excellent adhesion to commercial PE mill-applied coatings.
- Simple stick form.
- No special equipment required.
- Highly economical.
- Double reconstruction of the damaged coating.
- Guarantees a virtually monolithic coating repair of high quality.
- Makes installation faster and more convenient – saves time.
- Makes installation fast and easy. Keeps installation costs low.